We
at UPFRONT would like you to enjoy
and keep this product for a long time,
so it is IMPORTANT that you follow
these instructions carefully.
Thankyou from UPFRONT.
IMPORTANT! Do
not get the backing paper wet at any
time before removing the vinal! This
WILL dammage the Decal.
Please be sure to have the following
items at hand when you are ready to
install your Decal |
|
| 1.
|
Roll
of paper towel |
|
| 2.
|
Spray
bottle filled with water and 1 or
2 drips of liquid soap |
| 3.
|
A
plastic squegee or credit card |
| 4.
|
A
utility knife or razor blade |
 |
|
|
| STEP
1 |
|
Clean
the window well. Make sure there is no
selotape or other items on the window.
|
|
| STEP
2 |
|
Take
off the backing paper and trow away. DO
NOT GET THIS PAPER WET WHILE THE DECAL
IS STILL ON |
|
STEP
3 |
|
Then
spray the window well with the liquid.
Ther wetter the better.
|
|
| STEP
4 |
|
Now
wet the Decal both sides and apply to the
window.
|
|
| STEP
5 |
|
| It
should now be possible to slide the Decal
around the window for exact positioning.
If not then apply more water to the underside
of the Decal. |
|
| STEP
6 |
|
When
happy with the position spray more liquid
to the back of the Decal.
|
|
| STEP
7 |
|
|
Now you are ready to use your squgee or
credit card. Start from the centre and work
the air and the water out to the edge. Repeat
this until you have removed all the air
and water bubbles. If the edges appear to
be wavey or wrinkled do not worry just allow
the window to dry for an hour then squgee
back down dry.
Now if you are happy with the position wipe
down the back with a paper towel and clean
up the window area. It takes anything from
3 - 7 days for theremaining water to evapourate
depending on the conditions. The Decal is
now firmly on your window until you want
to remove it. When removing, do so slowely
as to not stretch the Decal. And remember
to roll it up. |
|
